﻿GET_GEVOMechL2_11_01_01_41 - STEP-BY-STEP Screen
1
00:00:00,000 --> 00:00:04,875
Typical steps to remove the air compressor from the locomotive are as follows:

2
00:00:04,875 --> 00:00:10,875
<b>Note:</b> Some Evolution Series locomotives are equipped with an oil free air compressor.

3
00:00:10,875 --> 00:00:16,125
If removing oil free air compressor, disregard steps 1 and 2.

4
00:00:16,125 --> 00:00:23,625
1. Open the drain cock at the side of the locomotive to drain the lubricating oil from the air compressor.

5
00:00:23,625 --> 00:00:27,042
<b>Note:</b> The end of the drainpipe is capped.

6
00:00:27,042 --> 00:00:31,042
Remove the cap to drain the oil into a suitable container.

7
00:00:31,042 --> 00:00:37,583
Refer to the appropriate air compressor publication for air compressor lubricating oil capacity.

8
00:00:37,583 --> 00:00:44,542
2. Near the base of the air compressor, disconnect the lubricating oil drain piping at the pipe union.

9
00:00:44,542 --> 00:00:54,250
3. Remove the channel section from the radiator cab structure at the end of the air compressor removal slides on the A side of the locomotive.

10
00:00:54,250 --> 00:00:59,917
4. Remove the two bolts securing the door catch and remove the door catch.

11
00:00:59,917 --> 00:01:04,333
5. Disconnect the air compressor motor power cables.

12
00:01:04,333 --> 00:01:09,167
6. Disconnect the air compressor motor speed sensor.