﻿GET_GEVOMechL2_11_01_01_30 - STEP-BY-STEP Screen
1
00:00:00,000 --> 00:00:05,292
Typical steps to check the air compressor oil level are as follows:

2
00:00:05,292 --> 00:00:11,875
1. Place the LCCB in the OFF position to prevent the air compressor from running.

3
00:00:11,875 --> 00:00:21,417
2. Check the air compressor oil level using the oil dipstick or oil level gauge located on the air compressor and add oil, if needed.

4
00:00:21,417 --> 00:00:29,750
<b>Note: </b>When using the dipstick to take an oil level reading, the dipstick should first be removed and wiped clean, and then re-inserted.

5
00:00:29,750 --> 00:00:34,708
Ensure that the dipstick is fully seated, and then remove it and take the reading.

6
00:00:34,708 --> 00:00:38,292
Add oil as indicated on the dipstick or gauge.

7
00:00:38,292 --> 00:00:48,250
3. Open the aftercooler petcocks each time the oil level is checked to allow accumulated moisture and small amounts of lubricant to be exhausted.

8
00:00:48,250 --> 00:00:53,417
4. Close the petcocks when the moisture has been drained.
